The short answer
It depends on what you build, what materials you can source and how you value your time. For small, simple structures such as hoop houses and cold frames, building is usually cheaper, especially if you reuse windows, pallets or other materials. For larger polycarbonate or glass houses, the gap narrows, and a kit can cost the same or less once you add lumber, tools, glazing, fixings, mistakes and your own hours.
When building usually costs less
- You already own basic carpentry tools and know how to use them.
- You can get free or discounted materials, such as salvaged windows, timber or cattle panels.
- You want a simple shape, such as a hoop house or a cold frame, that does not call for engineered parts.
- You do not need the greenhouse to match a particular footprint or style.
- Local rules are lenient on small or temporary structures.
Typical examples are PVC or cattle-panel hoops covered with plastic sheeting. They can be very cheap but may need cover replacement every few seasons and are less sturdy in wind or snow.
When a kit makes more sense
- You want predictable cost and parts that fit.
- Lumber and polycarbonate prices in your area make a bundled kit competitive.
- You would rather not spend several weekends sourcing and cutting materials.
- You want a tested design with published wind and snow figures and a warranty.
- You need rigid, well-sealed glazing, which is harder to get right with homemade frames.
Kits are not trouble-free. Assembly can be long and the instructions unclear; see how long it takes to assemble a greenhouse kit.
Side-by-side
| Build your own | Buy a kit | |
|---|---|---|
| Typical upfront cost for small, simple builds | Often lower, especially with reused materials | Higher than the cheapest DIY |
| Typical cost for polycarbonate or glass | Can be similar or higher than a kit | Predictable; sales are common |
| Time | Planning, sourcing, cutting and building | Mainly assembly and base preparation |
| Skills | Carpentry, measuring and fixing | Following instructions, handling large parts |
| Design flexibility | High | Limited to what the kit offers |
| Strength and weather rating | Depends on your design | Published ratings, with conditions |
| Warranty and replacement parts | None | Often available |
Costs that apply to both
Some costs show up whichever route you take: a level base and drainage, anchoring, ventilation, shelving, water supply, any heating or electricity, and possible permit fees. These can add up to hundreds or even thousands of dollars. See How much does it cost to build a greenhouse? for a longer list.
Time and skill
DIY builds can be rewarding and flexible, but they take planning and mistakes can be expensive. Heavy glazing and tall frames also raise safety questions, so get help with lifting and avoid working at height alone. Kits cut the planning but not the effort, and the assembly steps still need patience and a helper.
A middle path
Many gardeners combine both approaches: buy a kit and build a proper timber or masonry base themselves, or build a timber frame from plans and buy twin-wall polycarbonate panels. You can also start with a low-cost kit and upgrade parts later. Our guide to low-cost greenhouse kits covers inexpensive ready-made options.
How to decide
Price both routes in full: list every material and tool for the build, then compare with the kit price plus delivery and base. Add a contingency to each, value your time honestly, and consider how long you want it to last. If you are still unsure, a modest kit from the best greenhouse kits list is a lower-risk place to start.