DIY Greenhouse Building

How to Build a Wood-Frame Greenhouse Step by Step

A step-by-step guide to building a wood-frame greenhouse: choosing lumber, building a square base, framing walls and roof, bracing, door, vents and glazing.

On this page
  1. Before you start
  2. Tools and materials
  3. Step 1: Prepare the site and base
  4. Step 2: Square the base
  5. Step 3: Frame the walls
  6. Step 4: Build and raise the roof
  7. Step 5: Brace and anchor
  8. Step 6: Frame the door and vents
  9. Step 7: Glaze
  10. Finishing and maintenance

Before you start

A wood frame is forgiving for beginners: you can cut it with common tools, adjust it as you go, and attach almost any glazing. The trade-off is that wood is exposed to damp air and soil, so choose materials and details that resist rot.

Choose the wood. Rot-resistant species such as cedar are popular but costly. Pressure-treated lumber is widely used for bases and posts. Many gardeners avoid placing treated wood where it touches edible soil, so use it for the base and framing rather than for planting beds, or choose another material for those. Standard framing lumber works above a protected base if you seal or paint it. For how wood compares with metal frames, see aluminum, wood or steel greenhouse frames.

Plan the size and layout. Draw the plan, including the door, vents and the glazing you will use. Frame spacing should match the width of your panels or glass. Polycarbonate panels are commonly framed on spacing that matches their width, often around 24 inches on center for 4-foot sheets, but always check your panel maker’s guidance. See building with polycarbonate panels or glass greenhouse plans for glazing specifics.

Check rules. See do I need a permit for a backyard greenhouse.

Tools and materials

  • Circular or miter saw, drill and driver, level, speed square, tape measure, string line, shovel
  • Framing lumber for the base, wall studs, plates, rafters and braces
  • Exterior-rated screws or nails, galvanized brackets and hurricane ties
  • Gravel, concrete blocks, concrete or deck blocks for the base
  • Glazing and fasteners to suit
  • Hinges, latch and weatherstripping for the door
  • Vent openers or hinges for windows

Step 1: Prepare the site and base

Clear and level the area. Contact the local utility locating service before digging. Choose a base: a pressure-treated timber frame set on compacted gravel or concrete blocks is a common DIY option. Concrete footings or a slab last longer, and are better for heavy glazing. Raising the frame a little above ground keeps the wood drier. For more choices, see greenhouse base and foundation options.

Step 2: Square the base

Assemble the base rectangle. Measure both diagonals from corner to corner. When the two measurements are equal, the rectangle is square. Adjust until they match, then check it is level in both directions, shimming as needed. An out-of-square base causes problems at every later stage, from door fit to glazing gaps.

Step 3: Frame the walls

Build each wall flat on the ground. Cut a bottom plate and a top plate, then fit studs between them at the spacing your glazing needs. Add short horizontal blocking between studs for stiffness, and for any tall walls, as a stiffening guide, mid-height blocking is commonly used. Frame openings for the door and any windows now, with a header above each opening. Raise each wall, check it is plumb, brace it temporarily, and fix it to the base. Screw adjacent walls together at the corners.

Step 4: Build and raise the roof

For a simple gable roof, cut rafters with matching angles. A common approach is to make one rafter as a template, test it, then cut the others to match. Join pairs at the ridge with a ridge board or gusset plates, and add collar ties or cross ties to keep the walls from spreading. Set rafters at the same spacing as the studs so that glazing lines up. Fix them to the top plates with metal ties.

Choose roof pitch for your snow load. A steeper roof sheds snow better. If you live in a snowy area, check local guidance for roof design loads. Our guide to greenhouse roof pitch covers angle, snow and light. A barn-style, or gambrel, roof is more complex, but follows the same principles.

Step 5: Brace and anchor

Add diagonal bracing in the walls and roof, since a glazed box has little stiffness of its own. Use corner braces or let-in diagonal boards. Anchor the base to the ground with stakes, concrete footings or bolts, depending on your foundation. In windy areas, anchoring and bracing are two of the most important things to get right. See how to anchor a greenhouse against wind.

Step 6: Frame the door and vents

Build the door as a separate frame with a diagonal brace so it does not sag, hang it on strong hinges, and add weatherstripping. Our guide on building a greenhouse door that seals well goes into detail. Place vents high, in the gable ends or roof, and low vents or a door to let cooler air in. Automatic vent openers that use no electricity are inexpensive and useful.

Step 7: Glaze

Install glazing following the maker’s instructions. Rigid panels need sealed edges and some room to expand. Film should be stretched and secured with battens. Seal gaps and fit trim. For a lean-to design that shares a wall with your house, see how to build a lean-to greenhouse.

Finishing and maintenance

  • Seal or paint exposed wood with a non-toxic, exterior-grade finish, or leave naturally rot-resistant wood untreated.
  • Lay a floor of gravel, pavers or mulch for drainage and weed control. See the best floor for a greenhouse.
  • Add benches, shelves, water storage and a thermometer.
  • Inspect annually for rot, loose fasteners, cracked glazing and sagging doors.

For a wider view of the options, see our overview of building a backyard greenhouse.

The complete guide to diy greenhouse building

How to Build a Backyard Greenhouse
Read the guide

Keep exploring

Guides from other topics

All topics →