Frames, Glazing and Foundations

What is the best floor to have in a greenhouse?

There's no single best greenhouse floor. Compare gravel, pavers, concrete, bare soil and other options, and see which suits how you grow.

On this page
  1. Short answer
  2. Floor options compared
  3. Which floor for which type of growing
  4. What to avoid
  5. How to lay a gravel or paver floor
  6. Drainage and cleaning

Short answer

There isn’t one best greenhouse floor; it depends on how you grow. As a general rule:

  • Gravel or pavers laid over a weed-suppressing membrane is a popular all-round choice. They drain well, they’re easy to lay and they look tidy.
  • Concrete is easy to clean and sterilize, but costs more and is harder to change.
  • Bare soil is best if you plant directly into the ground.

Whatever you choose, good drainage and a surface you can clean matter more than the specific material.

Floor options compared

Floor Pros Cons
Gravel over membrane Drains well, inexpensive, easy to DIY, good for standing pots and trays Can shift; weeds can come through if the membrane fails; uncomfortable to kneel on
Pavers or slabs Stable, tidy, good for paths, easy to sweep Need a level base; cost more than gravel
Concrete Durable, easy to clean, pest-resistant More expensive, hard to modify, can be slippery when wet, no in-ground planting
Bare soil Allows in-ground growing, lowest cost Muddy paths, weeds, soil-borne disease can build up
Decking or duckboards Comfortable underfoot Can hold moisture and rot, and gives pests a hiding place
Bark mulch or wood chips Soft underfoot Holds moisture and can rot; usually not recommended

Which floor for which type of growing

  • Growing in the ground: keep bare soil or raised beds for growing areas and lay paths in gravel or pavers. Many gardeners use this mix. For improving border soil, see the best soil and potting mix for greenhouse growing.
  • Growing in pots and grow bags: gravel, pavers or concrete are all fine. Choose a floor that drains and is easy to wipe down.
  • Benches and staging: a hard, level floor makes it easier to stand on benches and move trolleys. See greenhouse bench and staging systems.
  • Seed raising and propagation: a surface you can wash easily helps to keep pests and diseases in check.
  • Wheelchair or mobility needs: use firm, level pavers or concrete for paths.

What to avoid

Some commonly recommended materials work against you in a damp, humid space. Bark mulch and wood chips tend to stay wet and break down. Landscape fabric alone, without a covering, degrades in sunlight. Rounded pea gravel is hard to walk on and doesn’t compact as well as angular crushed stone.

How to lay a gravel or paver floor

  1. Remove any sod and level the ground.
  2. Lay weed-suppressing membrane across the area, overlapping the joins.
  3. Add a compacted layer of crushed stone, or a sand bedding for pavers.
  4. Lay pavers and tap them level, or rake a layer of gravel on top and compact it.
  5. Sweep or brush joints with sand if needed.

If the floor is part of a larger build, it is usually easiest to lay it before the greenhouse is assembled or after the base is in place. See greenhouse base and foundation options for how base and floor fit together.

Drainage and cleaning

Slightly sloping the floor, or leaving a drainage gap, helps water run away. Check that rain, gutter overflow and watering don’t pool at the edges. If you collect roof water, see greenhouse gutters and rainwater collection setup. Sweep up fallen leaves and debris regularly, and wash hard floors at the end of the season to reduce pests and disease. See the greenhouse maintenance checklist. For other parts of the structure, see greenhouse structure: parts and components explained.

The complete guide to frames, glazing and foundations

Greenhouse Structure: Parts and Components Explained
Read the guide

Keep exploring

Guides from other topics

All topics →