Before you pick a design: what to decide first
Most greenhouse regrets come from skipping a few early decisions. Settle these before you buy anything:
- What you want to grow. Seed starting and season extension for cool-weather crops need much less than tomatoes through winter or tropical plants.
- How much you can spend, including the cover, which will need replacing eventually, and any heating.
- How much space you have, and how much of it gets good sun.
- How long you plan to stay. A hoop house suits a short-term or rented yard. A framed structure on a proper base suits a long-term one.
- Local climate. Snow load, wind and winter lows affect the frame and glazing you should choose.
A slightly larger greenhouse than you think you need is a common piece of advice from growers, because plants fill space quickly. It is also harder to heat, so weigh both.
Choose a site
Look for a level spot with good light for as much of the day as you can manage. In the Northern Hemisphere, many builders orient the long side to face south, or place the greenhouse so the main glazing gets the most winter sun. Keep it clear of tall trees and buildings that would shade it in winter, when the sun is low. For more on siting, see placing a greenhouse in your garden or allotment.
Also think about:
- Drainage. Avoid low spots where water collects.
- Wind. A windbreak helps, but keep it far enough away that it does not shade the structure.
- Access to water and power, which is easier to plan now than to add later.
- Distance from the house. You will visit more often if it is easy to reach in bad weather.
- Underground utilities. Contact your local utility locating service before digging.
Choose a frame material
- Wood is forgiving for beginners and easy to modify. Use rot-resistant lumber or a sealed base where wood meets the soil. See the wood-frame greenhouse step-by-step guide.
- PVC pipe is cheap and light, and suits small hoop or dome structures, though it can weaken in sun and cold over time. See the PVC dome greenhouse guide.
- Metal (steel or aluminum tubing, or cattle panels) is stronger and lasts longer. Cattle panels are a popular rigid option, covered in the cattle panel greenhouse guide. For durability comparisons, see aluminum, wood or steel greenhouse frames.
Choose glazing
- Polyethylene film is the cheapest cover and is replaced every few years. Greenhouse-grade film is made to resist UV.
- Polycarbonate panels (twin-wall or multiwall) insulate better than film or single-pane glass and are light and durable. See how to build a greenhouse with polycarbonate panels.
- Glass lasts and looks good but is heavy, breakable and needs a sturdier frame. See the glass greenhouse plans.
Reclaimed windows are a common budget option. If they are old, be aware that old paint may contain lead, so handle and sand them carefully or choose another material. Our greenhouse glazing guide compares the main materials in more detail.
Pick a design
Rather than starting with a blank page, match your situation to a proven build:
| If you want… | Consider |
|---|---|
| The lowest cost | Cheap DIY greenhouse with recycled materials |
| A tough, arched structure that is quick to build | Cattle panel greenhouse or a hoop house over a raised bed |
| Something small for seedlings | DIY mini greenhouse or a cold frame |
| Extra warmth from your house | Lean-to greenhouse |
| Winter growing in a cold climate | Year-round solar greenhouse |
| A dome shape | PVC dome greenhouse |
For an overview of shapes and styles, see types of greenhouses.
Barn-style (gambrel) greenhouse plans
“Barn” greenhouse plans usually refer to a gambrel roof, which has two slopes on each side, steeper below and shallower above. The shape gives more headroom near the walls and room for hanging baskets or shelves, and it sheds snow reasonably well. It is more complex to frame than a simple gable, because the roof needs more cuts and joints, so it suits someone comfortable with carpentry. If you are new to building, a simple gable frame is easier to get right. The wood-frame guide covers the fundamentals that also apply to a barn-style frame.
General build sequence
Details vary, but most builds follow this order:
- Check rules and mark the footprint. See the permit section below.
- Level the site and build a base. Options include a pressure-treated timber frame, concrete blocks, a gravel pad or a concrete slab. See greenhouse base and foundation options.
- Square the base. Measure diagonals corner to corner; if they match, the rectangle is square.
- Raise the frame. Build walls and roof sections, brace them and anchor the structure against wind.
- Frame the door and vents before covering, so the openings are accurate. See how to build a greenhouse door that seals well.
- Install glazing, following the manufacturer’s instructions.
- Seal gaps, then add the floor, benches or beds.
- Install ventilation, water and power, then test them before planting.
Ventilation, water and power
Greenhouses overheat more often than they freeze. Plan for ventilation from the start: roof vents or high windows to let hot air out, and low vents or a door to draw cooler air in. See greenhouse roof vents and ventilation. Automatic vent openers that work without power are inexpensive. A small fan helps air circulation and reduces damp.
For water, a nearby hose connection is the minimum. Rain barrels are a low-cost option, and water storage inside also acts as thermal mass. See greenhouse gutters and rainwater collection. If you run electricity, have a qualified electrician install it, and use weatherproof, GFCI-protected outlets because of the damp environment.
What does it cost? Build or buy?
Costs vary widely with size, materials and region, so treat any single figure with caution. A simple film-covered hoop or recycled-material build can be quite inexpensive. A polycarbonate or glass structure on a permanent base costs a lot more. Building often saves money on a like-for-like structure, particularly when you reuse materials, but it costs time and needs some skill. Kits are more predictable and come with instructions, though they may use lighter materials than a well-built DIY frame.
A fair way to decide: price your materials list in full, including fasteners, base, glazing, door hardware and vents, and compare it with kits of similar size and glazing. Our guides to what it costs to build a greenhouse and whether it is cheaper to build or buy go into more detail.
Permits and rules
Rules differ by location. Small structures are often exempt from building permits, but size limits, setbacks from property lines, and height rules vary, and homeowners’ associations may add their own requirements. Our guide on whether you need a permit for a backyard greenhouse explains what to check. Contact your local planning or building department before you build.
Common mistakes
- Choosing a shady site because it is convenient.
- Under-planning ventilation, then cooking the plants in the first warm spell.
- Skimping on anchoring, which matters more than most people expect in wind.
- Building a door that does not close properly, which wastes heat and lets pests in.
- Ignoring the winter question. If you want to grow through cold months, read do greenhouses work in winter before settling the design.