Frames, Glazing and Foundations

Greenhouse Gutters and Rainwater Collection Setup

How to fit greenhouse gutters and downpipes, size a rain barrel or water butt, estimate how much rain you can collect, and handle overflow and water quality.

On this page
  1. Why add gutters
  2. Parts of the system
  3. Can you buy greenhouse gutters?
  4. Pipes and fittings
  5. How much water can you collect?
  6. Step-by-step setup
  7. Overflow, quality and winter
  8. Can I replace guttering myself?

Why add gutters

A greenhouse roof sheds a lot of water in a short time. Without gutters, it drips along the eaves, splashes soil onto the base and glazing, and can erode the ground or make the area muddy. Gutters and downpipes control that water and, if you want, store it for watering. Rainwater is generally well liked by plants and is free, which is why a water butt (rain barrel) is one of the most popular greenhouse add-ons.

Parts of the system

  • Gutter: a channel along the eaves, usually on both long sides of a gable greenhouse.
  • Stop ends and joiners: close the ends and connect lengths.
  • Outlet: the opening in the gutter where water leaves.
  • Downpipe (downspout): carries water down from the outlet.
  • Diverter or filter (optional): sends water into the tank and screens out debris.
  • Water butt, barrel or tank: stores the water.
  • Overflow: carries surplus water to a drain, soakaway or garden when the tank is full.

Can you buy greenhouse gutters?

Yes. Many greenhouse manufacturers sell gutter kits for their specific models, which fit the eaves and are often sold in sets with a downpipe and sometimes a small water butt. If your kit has no gutter option, small-profile garden or shed gutters can often be adapted, though you may need brackets or a custom fixing. They come in several colors, including green, black and white, as well as aluminum.

Pipes and fittings

  • What kind of pipe is used for downspouts? The most common choices are PVC or other plastic and aluminum. Plastic is cheap and easy to cut and fit. Aluminum is more rigid and doesn’t degrade in sunlight. For a greenhouse, match the downpipe to the gutter outlet size, and use the same system for gutter, joiners and outlet, so the fittings seal.
  • Use flexible hose or short connectors to link the downpipe to a water butt or diverter.
  • Choose UV-stable plastic parts for outdoor use.

How much water can you collect?

A simple rule: 1 millimetre of rain on 1 square metre of roof gives about 1 litre of water. So multiply the roof footprint (the area it covers, not the sloped surface) by the rainfall.

For example, a 3 m by 2 m greenhouse has a roof area of about 6 square metres. A 10 mm shower would yield roughly 60 litres, in theory, before any losses to splash, overflow and evaporation. Real collection will be somewhat lower.

If you work in US units, a commonly used figure is that one inch of rain on 1,000 square feet gives about 600 gallons. Use it as a rough guide.

Keep in mind that a small greenhouse can fill a typical barrel quickly, so decide how much storage you actually need, and whether you want to link several barrels. For getting water to plants efficiently, see how to set up drip irrigation in a greenhouse.

Step-by-step setup

  1. Plan the fall. Gutters need a very slight slope toward the outlet. Follow the kit’s instructions, since greenhouse gutters are short, and a small, even slope is usually enough.
  2. Fix the brackets along the eaves at the spacing the maker recommends, checking they’re secure on the frame. If the frame is aluminum, use compatible fixings.
  3. Fit the gutter into the brackets, add stop ends and joiners, and seal the joints if required.
  4. Fit the outlet and downpipe. Position the outlet toward the end that suits your water butt.
  5. Place the water butt on a level, firm stand with room to fit a watering can under the tap. Consider a lid to keep out debris, insects and light.
  6. Add a diverter or filter so the tank fills first and debris stays out.
  7. Set up the overflow, so surplus water goes away from the greenhouse base and any foundation. See greenhouse base and foundation options and think about where water goes if the tank is full.
  8. Test with a hose before relying on it.

Overflow, quality and winter

  • Overflow: always plan for it, because heavy rain will fill any tank. Directing it to a drain, soakaway or garden bed away from the greenhouse protects the base.
  • Water quality: stored water can grow algae and bacteria, especially in warm weather and in light. Use a lid, keep the tank dark and clean it occasionally. Use clean mains water for seedlings and edible leaves that might be eaten raw if you are concerned, and avoid using stored water from roofs where there may be treated or contaminated surfaces.
  • Winter: frozen water can crack tanks, pipes and taps. Drain or protect them if freezing is likely.
  • Local rules: some regions regulate rainwater harvesting, so check what applies where you live.
  • Cleaning: keep gutters free of leaves, moss and debris, which can block outlets. Add it to your greenhouse maintenance checklist.

Can I replace guttering myself?

On a low structure like a greenhouse, replacing or fitting gutters is usually a reasonable DIY job with basic tools and a stable step ladder. Follow the maker’s instructions, take care with sharp aluminum edges and use gloves. If your greenhouse is attached to a house or is high up, get help or hire a professional.

For the way gutters fit into the overall structure, see greenhouse structure: parts and components explained. A good gutter also protects your frame from constant wetting, and works best with a well-chosen roof pitch.

The complete guide to frames, glazing and foundations

Greenhouse Structure: Parts and Components Explained
Read the guide

Keep exploring

Guides from other topics

All topics →