Greenhouse Types

What is a gable greenhouse?

A gable greenhouse has two sloping roof sides meeting at a central ridge, like a small house. See how it compares with arch and lean-to designs.

On this page
  1. Short answer
  2. How a gable greenhouse is built
  3. Advantages
  4. Disadvantages
  5. Gable vs arch vs lean-to
  6. Home or commercial
  7. What to check when buying
  8. A note on lean-to greenhouses

Short answer

A gable greenhouse is a greenhouse with a pitched roof, two sloping sides that meet at a central ridge, on top of vertical side walls. It looks like a small house or the way a child might draw one. It is often called an even-span or A-frame greenhouse, and it is one of the most common designs for home gardens.

How a gable greenhouse is built

The basic structure is a rectangle of vertical walls with a roof made of two equal slopes. The frame is usually aluminium, timber or steel, and the glazing can be glass, polycarbonate or, in some cases, film. In larger or commercial versions, the roof is held up by trusses, which are triangular frames that carry the load and allow wide spans without many internal supports.

Many hobby gable greenhouses sit on a low base wall or a metal base frame, with a door at one or both ends and roof vents along the ridge.

Advantages

  • Headroom. Straight side walls give useful space along the edges for benches and tall plants, compared with a curved or sloped side.
  • Ventilation. The ridge allows for roof vents at the highest point, where hot air collects. That makes natural airflow easier to arrange.
  • Winter light. The roof angle can be chosen to suit light conditions.
  • Condensation. A pitched roof lets condensation run down the glazing to the gutters, not drip onto plants as readily as it can on a flat or very low arch.
  • Internal support. The frame allows hanging baskets, shading, irrigation lines and similar equipment to be attached.
  • Strength. A well-built gable handles wind and snow loads reasonably, particularly with a steeper pitch.
  • Appearance. It has a classic look that suits most gardens.

Disadvantages

  • Cost. Usually costs more than a similarly sized hoop or arch house, since there are more parts.
  • Assembly. More pieces, more joints and sometimes heavy glass mean longer installation.
  • Level base. Needs a flat, well-built foundation.
  • Less efficient use of material. Compared with a lean-to, it needs glazing on all sides.

Gable vs arch vs lean-to

Gable Arch / gothic arch Lean-to
Roof Two slopes meeting at a ridge Curved, possibly pointed One slope against a wall
Sidewall space Good Limited by curve Good
Cost Moderate to higher Lower Often lower than a freestanding house
Placement Freestanding Freestanding Against a building or wall
Ventilation Ridge vents easy Usually fewer options Roof and side vents

See arch and gothic arch greenhouses for more on curved designs.

Home or commercial

In commercial growing, gable houses can be built in rows and joined at the eaves with shared gutters to create large, connected structures. Large multi-bay glass houses are often called Venlo-style, see what is a Venlo greenhouse. For home use, a single free-standing gable is the typical choice.

What to check when buying

  • Frame material and finish. Aluminium resists rust; timber needs treatment.
  • Glazing. Glass looks clear but breaks; polycarbonate is tougher but has its own downsides. See the disadvantages of polycarbonate greenhouses.
  • Number and size of vents. A common guideline from gardening sources is that roof vent area should be a decent proportion of the floor area. Check the maker’s recommendations.
  • Base. Ensure you have a level, solid base of the correct size.
  • Door width. Make sure you can fit a wheelbarrow through.
  • Gutter and water collection. Some kits let you connect a water butt.

A note on lean-to greenhouses

A lean-to is a related design that uses half of a gable shape against an existing wall. If you want to build one, the broad steps are to choose a sunny, solid wall, check the wall and base, build a sturdy base, fix a ledger or wall plate to the wall (with flashing so water cannot run behind it), build the frame and roof slope, add glazing, then doors and vents. The wall may need to be able to carry the load, and structures attached to a house are more likely to need approval, so check local rules and consult a builder if unsure. See how to build a lean-to greenhouse against your house for the full steps, or lean-to greenhouse kits for ready-made options.

For the full range of designs, see types of greenhouses.

The complete guide to greenhouse types

Types of Greenhouses by Shape and Style
Read the guide

Keep exploring

Guides from other topics

All topics →