What an arch greenhouse is
An arch greenhouse has a curved roof that runs down into the side walls, rather than the flat sides and sloping roof of a gable design. The frame is made from bent hoops or ribs, joined by lengthwise rails (purlins), and covered with polyethylene film, polycarbonate panels or, less often, glass.
Because the frame is simple, arch greenhouses are usually quicker and cheaper to put up than a house-shaped greenhouse of similar floor area. They are common in both home gardens and commercial growing.
Gothic arch vs round arch
A round arch, often called a hoop or Quonset style, follows a smooth half-circle. A gothic arch has a pointed peak, a bit like a church window.
The pointed top has practical effects:
- Snow and rain slide off more readily than from a smooth curve.
- There is generally more headroom near the sides, so you can use more of the floor.
- The shape can look more finished, which suits some gardens better than a plain tunnel.
Gothic arch designs may cost slightly more than a basic hoop house, since the frame is a little more complex. For a simpler and cheaper cover, see polytunnels.
Advantages
- Lower cost for the space. Fewer parts and less framing than a gable design.
- Wind behaviour. A rounded profile gives the wind little to push against, though this depends on anchoring and the quality of the frame.
- Light. The curve lets light in from many angles through the day.
- Flexible glazing. Film or flexible panels follow the curve without much cutting.
Disadvantages
- Sidewall space. Even in a gothic arch, the curve limits tall plants and benches right at the edges.
- Fewer places to hang things. Simple hoop frames have fewer internal members for hanging baskets, shading or irrigation.
- Glazing wear. Film covers age in sunlight and generally need replacing eventually; check the manufacturer’s stated lifespan.
- Ventilation. Many basic kits have only end doors and a small number of vents, which can leave the house hot in summer. Look for roll-up sides or roof vents.
- Fixed look. Some people prefer the appearance of a traditional glazed greenhouse.
What to look for in an arched greenhouse kit
- Frame material and coating. Galvanized steel or aluminium resists rust better than bare steel.
- Spacing of the hoops. Closer spacing generally gives a stronger frame, which matters for snow and wind.
- Glazing. Twin-wall polycarbonate insulates better than single film; film is cheaper and easy to replace.
- Ventilation. Check the number and size of roof vents, side vents and doors.
- Anchoring. Kits should include a way to fix the frame to the ground, a base rail or ground anchors.
- Door height. Make sure you can walk in without ducking too much.
- Instructions and spares. Clear instructions and available replacement parts make a long-lived greenhouse easier.
Build or buy
Buying a kit saves planning time, and the parts are designed to fit. Building from scratch can reduce cost, especially if you can reuse materials, but bending and fixing hoops to a good standard takes some skill. Total cost depends heavily on size, materials and region, so get quotes or parts lists before deciding, and include the base, doors, vents and shelving.
Permits and planning
Local rules for garden structures vary and often depend on size, height and distance from boundaries. Check with your local authority before you buy or build. If you live in an area with heavy snow or high winds, ask whether there are any specific requirements for structural loads.
If you are still deciding between shapes, the greenhouse types overview compares them side by side, and the gable greenhouse article covers the main alternative.