Greenhouse Types

What are the disadvantages of a polycarbonate greenhouse?

Polycarbonate greenhouses insulate well but have drawbacks, including clarity, ageing, condensation and cheap sheet quality. See how they compare with glass.

On this page
  1. Short answer
  2. Main disadvantages
  3. How serious are these?
  4. Polycarbonate vs glass at a glance
  5. When polycarbonate still makes sense

Short answer

Polycarbonate greenhouses are popular because the panels are light, fairly tough and insulate better than single glass. Their main disadvantages are that they transmit and diffuse light differently from glass, can scratch, cloud or yellow with age, can trap moisture or algae inside twin-wall panels, and can vary a lot in quality. Many of these issues can be reduced by choosing good panels and installing them properly.

Main disadvantages

Less clear than glass

Single-sheet polycarbonate is fairly transparent, but twin-wall and multi-wall panels diffuse light and are not see-through. That is not necessarily bad for plants, since diffused light can spread more evenly, but it means you cannot see out as clearly, and some gardeners dislike the look. Multi-wall sheets also let through somewhat less light than clear glass, which may matter in dim winter conditions.

Ageing, scratching and yellowing

Polycarbonate can scratch more easily than glass. Over time, UV exposure can make the surface cloudy or yellow, especially in cheaper sheets without a good UV-protective layer. Good panels usually have a UV coating on the outer face, and warranties on yellowing vary. Check which side faces the sun and what the manufacturer’s warranty covers.

Moisture and algae in twin-wall panels

Twin-wall panels have hollow channels. If the ends are not sealed properly, dust, moisture and insects can get in, and algae can grow, leaving green streaks. Installing the panels with the channels vertical and using proper end caps or tape helps drainage and keeps out debris.

Thermal movement and sealing

Polycarbonate expands and contracts with temperature more than glass. If panels are fixed too tightly or not given room to move, they can crack, buckle or make noise. A well-fitted frame with the right clips and sealing strips is important, and poor sealing can cause leaks and drafts.

Quality varies widely

Thin, low-cost sheets may be flimsier, yellow sooner and transmit light less evenly. When choosing a greenhouse kit, check the panel thickness and any warranty. This is one of the most important differences between a good and a poor polycarbonate greenhouse.

Can overheat if poorly ventilated

The insulation that helps in winter can mean heat builds up in summer. A polycarbonate greenhouse needs enough roof and side vents, and in hot areas, shading as well.

Looks and feel

Some people prefer the traditional look and feel of glass. Polycarbonate is also less able to hold up fully against some kinds of impact or very heavy hail depending on thickness, though it is generally more resistant to breakage than glass.

Environmental considerations

Polycarbonate is a plastic made from fossil-fuel-based materials. Recycling options may be limited in some areas, so check local facilities when panels reach the end of their life.

Resale and perceived value

Some buyers see glass as a premium option, which may matter if you are thinking about the effect on a property. This is subjective and varies.

How serious are these?

Drawback How to reduce it
Lower clarity Use single-layer panels in places where you want a view, or accept diffused light
Yellowing and scratching Choose UV-protected panels with a warranty, clean gently with soft cloths
Algae and moisture in channels Seal ends, install channels vertically
Thermal movement Leave expansion gaps, use correct clips and seals
Variable quality Check thickness and warranty
Summer heat Add vents and shade

Polycarbonate vs glass at a glance

Polycarbonate Glass
Weight Light Heavy
Insulation Better, especially twin-wall Lower for single glazing
Impact resistance Generally better Can shatter
Light clarity Diffused or slightly lower Very clear
Appearance More modern/functional Traditional
Installation Often easier for DIY Often more demanding
Ageing May yellow or scratch Stays clear, but can break

Details vary by product, so use these as general guidance.

When polycarbonate still makes sense

For many gardeners, polycarbonate is a sensible choice because it is lighter, easier to install and holds heat better. It is a good fit for colder regions, for families with children or pets where breakage is a concern, and for people who want a lower-effort kit. It is also commonly used for pit and earth-sheltered designs, see sun pit greenhouses, and in combined buildings, see greenhouse and potting shed combos.

If you plan to heat the greenhouse, insulation matters more. Read cold vs heated greenhouses. To compare other options, see types of greenhouses.

The complete guide to greenhouse types

Types of Greenhouses by Shape and Style
Read the guide

Keep exploring

Guides from other topics

All topics →