The main parts of a greenhouse at a glance
Almost every backyard greenhouse, from a small lean-to to a large freestanding glasshouse, is made of the same handful of parts:
- Base or foundation: what the structure sits on and is fixed to.
- Frame: the skeleton of uprights, rafters and bars that carries the covering.
- Glazing: the glass or plastic that lets light in and keeps weather out.
- Roof, ridge and eaves: the top of the structure, which sheds rain, snow and heat.
- Vents and doors: how air and people get in and out.
- Gutters and downpipes: how rainwater is carried away or collected.
- Floor and interior fittings: paths, staging, shelves and beds.
The sections below cover each one, with links to the in-depth guides.
Base and foundation
The base is the part most people think about last, and it affects everything above it. A greenhouse needs to sit level and square, or doors and vents will stick and glazing can be stressed. Common choices are a timber frame, compacted gravel, a concrete perimeter or a full slab, and many kits come with or offer a matching steel base. See our guide to greenhouse base and foundation options for how they compare. Whatever you choose, the greenhouse also has to be fixed down, which is covered in how to anchor a greenhouse against wind.
Frame
The frame is the skeleton. Its main elements are:
- Uprights (posts or columns) that carry the weight down to the base.
- Rafters that run up the roof slope.
- Ridge bar along the top peak.
- Eaves where the roof meets the side walls.
- Glazing bars that hold each pane or panel in place.
Frames are usually aluminum, galvanized steel or wood. Each has different strengths for cost, maintenance and lifespan; the full comparison is in aluminum, wood or steel greenhouse frame: which lasts longest?
Glazing (covering)
Glazing is what turns a frame into a greenhouse. Options include horticultural glass, twin-wall polycarbonate, fiberglass-reinforced plastic (FRP) and polyethylene film. They differ in light transmission, insulation, weight, impact resistance and price. Our greenhouse glazing comparison goes through the trade-offs, and how do you glaze a greenhouse? covers fitting the panes.
Roof, ridge and eaves
The roof shape affects how well the greenhouse sheds rain and snow and how much winter light gets in. Pitch is part of that: see best roof pitch for a greenhouse. The roofing material is often a different choice from the wall glazing, which is discussed in what is the best roofing for a greenhouse?
Vents, louvres and doors
Greenhouses overheat quickly, so ventilation is not optional. Typical openings are:
- Roof vents (also called roof windows or ridge vents), which let hot air escape at the highest point.
- Side vents or louvres low down, which let cooler air in.
- Doors, which should be wide enough for a wheelbarrow or watering cans. Sliding doors are common in small spaces because they don’t need swing room. To build your own, see how to build a greenhouse door that seals well.
See greenhouse roof vents and ventilation for how many you may need and how to automate them.
Gutters and downpipes
Gutters run along the eaves and collect rain from the roof. A downpipe (downspout) carries the water from the gutter to the ground, a drain or a water butt (rain barrel). They protect the base from splashing and erosion, and they are the first step in collecting rainwater for watering.
- Can you buy greenhouse gutters? Yes. Many greenhouse manufacturers sell gutter kits designed to fit their own frames, and generic small-profile gutters can often be adapted.
- What kind of pipe is used for downspouts? Plastic (PVC or similar) and aluminum are the most common. Whichever you choose, check that it matches the gutter’s outlet size.
- Can I replace guttering myself? On a single-storey, low structure such as a greenhouse, this is usually a manageable DIY job with basic tools. Check the manufacturer’s instructions for the right brackets and fittings.
The full setup, including sizing and storage, is in greenhouse gutters and rainwater collection setup.
Floor, staging and interior fittings
Inside, the floor can be bare soil, gravel, pavers or concrete, and each affects drainage, cleanliness and where you can plant. See what is the best floor to have in a greenhouse? Benches (staging), shelves and hooks make better use of space, and many gardeners keep part of the floor as growing beds. See greenhouse bench and staging systems.
Materials you need to build one
If you’re building rather than buying a kit, you’ll generally need:
- Base materials (timber, gravel, concrete or a steel base kit, plus fixings).
- Frame material (aluminum, steel or treated or naturally durable timber).
- Glazing and the fixings that go with it (clips, glazing bars, seals or tape).
- Hinges, latches and vent openers.
- Optional extras: gutters, shelving, shading and heating.
Plans differ a lot by size and glazing, so always work from a specific design or manufacturer drawing. Our guide to building a backyard greenhouse walks through the process.
Must-haves for a first greenhouse
Most people find these matter more than any extra:
- A level, secure base.
- Enough ventilation, ideally with at least one roof vent.
- A door you can actually get through with your equipment.
- A water supply nearby, or gutters feeding a water butt.
- Space to work: a bench, some shelving and a clear path.
For extras worth adding later, see must-have greenhouse accessories.
Limitations to know about
A greenhouse has real costs and chores, including heat management, pests and maintenance. These are covered honestly in what are the disadvantages of a greenhouse? If you plan to grow through winter, you may also want to read greenhouse insulation ideas.
Frequently asked questions
What are the parts of a greenhouse called? The base (foundation), frame (uprights, rafters, ridge bar, glazing bars), glazing, roof vents, doors, gutters and downpipes, and the interior floor and staging.
What materials are needed to make a greenhouse? A base, a frame, glazing and fixings, plus doors, vents and any optional extras such as gutters and shelving.
What are must-haves in a greenhouse? A level base, good ventilation, a usable door, a water source and some bench or shelf space.