Frames, Glazing and Foundations

What is the best roofing for a greenhouse?

Twin-wall polycarbonate, glass, FRP or film? Compare greenhouse roofing materials by light, insulation, hail resistance, weight and cost.

On this page
  1. Short answer
  2. Roofing options compared
  3. Why the roof is different from the walls
  4. Choosing by climate
  5. Roof shape and pitch
  6. Installation notes

Short answer

For most backyard greenhouses, twin-wall polycarbonate is a popular roof covering. It is light, fairly tough, insulates better than single-pane glass and diffuses sunlight. Glass gives the most light, FRP is a durable utility option, and polyethylene film is the cheapest. The best choice depends on your climate, budget and what you grow. For the drawbacks of polycarbonate, see what are the disadvantages of a polycarbonate greenhouse.

Roofing options compared

Roofing Best for Main drawbacks
Twin-wall polycarbonate All-round use, cold or hail-prone areas, DIY Slightly less light than glass; cheap sheets can yellow; ends must be sealed
Toughened (tempered) glass Maximum light, long-lasting look Heavy, can break, poor insulation unless double glazed
Laminated glass Hail and impact risk where glass is wanted More costly; heavy
FRP panels Utility and agricultural structures Light diffusion rather than clarity; lower grades can discolor
Polyethylene film Low-budget or hoop houses Needs replacing every few years; less durable
Single-wall polycarbonate or acrylic Budget alternatives to glass Less insulating; check the specific product

Specific figures for light transmission and insulation vary by product, so check the manufacturer’s data.

Why the roof is different from the walls

The roof faces the harshest conditions: direct sun, hail, snow load and falling debris. It also has the biggest effect on summer heat and winter light. That’s why some builders use different materials above and below:

  • Safety: glass overhead can fall if it breaks, whereas polycarbonate usually just cracks. Many people choose tougher material for the roof and glass or other glazing for the walls.
  • Weight: a heavy roof needs a stronger frame. See aluminum, wood or steel greenhouse frame.
  • Condensation: water will form on the underside of any roofing, and the roof shape and pitch determine whether drips fall on plants or run down to the eaves.

Choosing by climate

Roof shape and pitch

The roofing material works together with the roof shape. Curved or gothic roofs, and steeper pitches, shed snow and water more easily. Flat or very low roofs collect it. See arch and gothic arch greenhouses. Rigid sheets such as polycarbonate can be curved over a bowed frame, depending on thickness and manufacturer’s minimum bend radius.

Installation notes

Roof panels are fixed with specific caps, profiles and sealing tapes, and each product has its own rules. In general:

  • Fit the UV-protected side outward, as marked.
  • Leave room for expansion.
  • Seal the open ends of multiwall sheets so dirt, insects and algae don’t get in.
  • Use proper fixings and don’t overtighten.

Step-by-step is in how do you glaze a greenhouse? For a DIY build, see how to build a greenhouse with polycarbonate panels. For a full comparison of coverings, see greenhouse glazing: glass, polycarbonate and FRP.

The complete guide to frames, glazing and foundations

Greenhouse Structure: Parts and Components Explained
Read the guide

Keep exploring

Guides from other topics

All topics →