Why maintenance matters
Regular upkeep keeps glazing clear, vents working and the structure sound. Professional growers’ guides stress preventive maintenance because small problems like a loose bolt, a stuck vent or a torn panel can become expensive. At hobby scale the jobs are simpler but the logic is the same, and good upkeep also helps a greenhouse last longer (see the life expectancy of a greenhouse).
Daily and weekly habits
- Check the temperature. Read your min-max thermometer and reset it.
- Open vents and doors on sunny days, and close them before it cools. Whether you need to open the greenhouse every day depends on the season and weather. In spring and summer, regular venting is usually necessary to prevent overheating. In winter, a short period of ventilation on milder days can still help reduce damp air. See how to control humidity in a greenhouse.
- Check watering. Test the soil rather than watering by habit.
- Look at your plants. Remove dead leaves and spot pests or disease early.
- Pick up debris. Fallen leaves and spilled soil hold moisture and shelter pests.
Monthly checks
- Wipe down benches and tidy trays and pots.
- Check automatic vent openers and fans.
- Inspect doors and vent seals for gaps.
- Look for algae on glazing, floors and benches.
- Test any alarms or monitors.
Spring: get ready to grow
- Wash the glazing inside and out with mild soapy water and a soft brush or sponge. Cleaner panels let in more light.
- Check the frame for loose bolts, rust or rot, and tighten or repair as needed.
- Clear gutters and downpipes if you have them.
- Inspect and clean vents, hinges and louvers, then lubricate moving parts.
- Check shade cloth and put it up before hot weather (see greenhouse shade cloth).
- Clean and disinfect pots, trays and tools.
Summer
- Watch temperature and ventilation closely (see how to cool a greenhouse in summer).
- Check irrigation lines, emitters and filters for clogs (see drip irrigation setup).
- Keep an eye out for spider mites, aphids and whitefly, which can do well in warm greenhouses.
Autumn: deep clean and prepare for cold
- Remove spent plants and debris and clean surfaces so pests and diseases have fewer places to overwinter.
- Take down and wash shade cloth, or remove shading paint with a product made for the job.
- Clean the glazing again, since low winter light is precious.
- Check seals, weather-stripping and any holes in covers.
- Service heaters according to the manufacturer’s guidance before the cold arrives. Gas and oil heaters usually need professional servicing; ask a qualified technician.
- Test your backup plan: thermostat, power supply and any frost protection (see what size heater you need and how to keep a small greenhouse warm at night).
Winter
- Clear heavy snow from the roof carefully with a soft broom, working from a safe position. Avoid sharp tools that could damage panels. Wet snow can be heavy, so check your structure’s guidance.
- Keep watering light in cold weather, since soil dries slowly.
- Wipe condensation or improve airflow, because constant drips encourage mold.
- Check any heater, cables and plugs for wear.
- Don’t switch on water lines if pipes may be frozen.
By glazing type
- Polyethylene film: check for tears and repair small ones with proper repair tape. Film typically needs replacing every few years, and you should plan for it, particularly if it has yellowed, stiffened or become cloudy.
- Polycarbonate: wash with mild detergent and lukewarm water, and avoid abrasive cleaners. Look for yellowing, cracks and loose fixings.
- Glass: check for cracked or slipped panes and loose clips, and replace broken glass promptly. Wear gloves and eye protection when handling it.
Frame, floor and doors
- Look at corners and ground-level parts, where rust and rot often start.
- Repair cracks in concrete floors and make sure water can drain.
- Check door hinges, latches and seals.
- Make sure the anchoring is still secure after storms.
Keep a simple record
A notebook or phone note listing what you cleaned, replaced or repaired, and when, makes it easier to plan replacements. It also helps you track how your greenhouse behaves from season to season. If you’re still planning a greenhouse, the setup guide explains how design choices affect upkeep.