Short answer
There isn’t one number. A greenhouse can last anywhere from a few years to several decades, depending mainly on the frame material, the covering, the climate and how well it is maintained. A basic pop-up with a thin plastic cover may only last a few seasons, while a well-built frame with glass or good polycarbonate can last many years, with parts replaced along the way.
It helps to think of two separate lifespans: the frame and the covering. The covering often needs replacing long before the frame does.
How long coverings last
These figures are rough and vary by product, sun exposure and care.
- Polyethylene film: commonly a few years. Growers’ guides often suggest replacing standard greenhouse film around every four to five years, and UV-treated, thicker film may last longer than thin or standard plastic. Cheap, thin covers on pop-up greenhouses may last only a season or two in strong sun or wind.
- Polycarbonate panels: often cited at roughly 10 to 20 years, depending on quality and UV protection. Low-quality panels without a UV-protective layer can yellow and become brittle much sooner.
- Glass: it doesn’t degrade from sunlight, so it can last indefinitely if unbroken, but individual panes can crack from hail, impact or a shifting frame.
How long frames last
Again, these are rough ranges, and manufacturers’ warranties are a better guide for a particular model. For a closer comparison, see aluminum, wood or steel greenhouse frames.
- Aluminum: coated or anodized frames can last decades. Thin, uncoated frames may corrode or bend sooner.
- Galvanized steel: often lasts many years if anchored well and kept free of corrosion, especially where the coating is scratched or at ground level.
- Wood: depends heavily on the species and treatment. Rot-resistant woods like cedar, and well-treated timber, can last a long time with care, while untreated softwood in damp conditions may not.
- Plastic or lightweight tube frames (pop-ups and portable greenhouses): these are often short-lived, particularly in wind and sun.
What shortens a greenhouse’s life
- Strong wind, especially if the frame isn’t anchored
- Heavy snow loads on structures not designed for them
- UV exposure on low-quality plastic
- Rot and rust from constant dampness
- Hail or impact damage
- A soft or uneven base that lets the frame twist
- Skipping repairs, so small problems grow
What extends it
- Level, solid base and secure anchoring: prevents twisting and wind damage (see setting up a small greenhouse).
- Regular cleaning and inspection: wash glazing, clear debris, check seals and tighten fasteners.
- Prompt repairs: patch small tears, replace cracked panes and treat rust early.
- Replacing worn parts rather than the whole structure: panels, seals, hinges and vent openers can often be swapped.
- Appropriate shade and ventilation: reduce stress on covers and keep humidity under control.
- Choosing a structure rated for your climate: check wind and snow ratings if you live somewhere with harsh weather.
A seasonal routine helps, and you can follow the greenhouse maintenance checklist.
Repair or replace?
If the frame is sound, replacing the covering is usually cheaper than starting again. If the frame is badly bent, rusted through or rotted, or you can’t get replacement parts, a new structure may make more sense. Ask the manufacturer about spare parts before you buy, since availability affects how long a greenhouse stays useful.