What “heavy-duty” means in practice
“Heavy-duty” is a marketing term with no fixed definition. In practice, a sturdier greenhouse generally has a stronger frame, thicker glazing, more fixing points and a proper base. A storm-resistant greenhouse also needs to be anchored and sited sensibly. A premium kit that is poorly anchored can still fail.
What to check on the spec sheet
- Frame. Heavy aluminium extrusions or galvanised steel are common in stronger kits. Look at wall thickness and the number of crossbars and reinforced joints, not just the metal.
- Glazing. Twin-wall polycarbonate is widely recommended for exposed sites because it resists impact. Thicker panels generally insulate better and feel more rigid. Check for UV protection to slow yellowing.
- Wind and snow ratings. Many manufacturers publish a wind speed and a snow load. Read the conditions attached to them: figures often assume the greenhouse is bolted to a specific base or fitted with an optional anchoring kit. Owner reviews sometimes report real-world performance below the stated rating, so treat the number as a starting point and leave a margin.
- Glazing retention. Panels that slide into channels, or are screwed rather than clipped, are often described as better in high wind. Clips can work loose over time.
- Warranty. Read what the warranty excludes. Wind damage is sometimes excluded or limited.
Polycarbonate or glass in wind?
Polycarbonate is lighter and far more impact-resistant, which is why it dominates heavy-duty hobby kits. Glass offers better clarity and a long life, and in the UK many traditional greenhouses use toughened (safety) glass in aluminium frames. Glass houses are heavy, which helps stability, but the glazing is more vulnerable to flying debris and costs more to replace. If branches or hail are likely, polycarbonate is the more forgiving choice.
Anchoring and foundations
A stable base is the single most important upgrade for a windy site. Common options include a timber base frame bolted to the ground, a concrete pad with anchor bolts, or a masonry or paver base with fixings. Most kits offer an optional base or anchor kit. Fixing the frame to the base, and the base to the ground, matters more than any single spec. Check fixings again after storms.
Placement and windbreaks
Place the greenhouse where it gets plenty of light but some shelter, for example behind a fence or hedge set back far enough not to cast shade. A solid wall can create turbulence, while a semi-permeable windbreak such as a hedge or slatted fence filters wind more gently. Avoid low spots where cold air and water collect, and keep the structure clear of overhanging trees.
Models and makers often cited
Roundups frequently mention Riverstone’s Monticello range, Solexx and Planta’s Sungrow models for heavier polycarbonate in North America, with Palram-Canopia as a lighter-weight alternative. In the UK, buyers generally compare aluminium-framed glass and polycarbonate ranges from several makers. Specifications change, so compare current wind, snow and glazing details, and read recent owner reviews. For a wider comparison, see our best greenhouse kits guide. If you are looking at Palram, our quality review covers how the lighter models hold up.
How thick should greenhouse plastic be?
For film, greenhouse-grade UV-stabilised polyethylene is the norm, and 6 mil is a commonly used thickness, though thickness is only part of what determines durability. For rigid panels, thicker twin-wall polycarbonate generally gives better insulation and stiffness. Cheap film kits will not match rigid panels in a storm; see our notes on low-cost greenhouse kits.
Keeping a greenhouse warm in a UK winter
Insulation helps more than it seems: twin-wall panels, draught-proofing gaps, bubble insulation on the inside, and thermal mass such as water containers. For frost protection, a small thermostat-controlled heater is common, and some gardeners simply move tender plants indoors on the coldest nights. Whatever you use, plan for ventilation, because damp stagnant air is an issue in winter.
After a storm
Walk around the greenhouse once it passes. Check that panels are seated, fixings are tight, and the base has not shifted. Remove snow carefully from the roof if it builds up heavily, and avoid using sharp tools on the glazing. If you are unsure about structural damage, get advice before going back in.