DIY Greenhouse Building

Cattle Panel Greenhouse: Kits and DIY Build

Cattle panel greenhouse guide: how kits compare with a DIY build, panel sizes, materials, step-by-step assembly, covering options and the limits of this design.

On this page
  1. What is a cattle panel greenhouse?
  2. Kit or DIY?
  3. Panel sizes and layout
  4. Materials
  5. Step-by-step build
  6. Covering and ends
  7. Tips and limits

What is a cattle panel greenhouse?

A cattle panel is a rigid sheet of heavy welded wire fencing, sold at farm and feed stores for livestock. Bent into an arch and anchored at the bottom, a panel becomes a stiff hoop. Several arches side by side, or a single long arch made from overlapping panels, form a tunnel-style greenhouse frame that you cover with plastic film or other glazing.

Growers like the design because the panels hold their shape better than PVC, are strong enough to stand up in wind when well anchored, and need little framing besides the ends. Many people use them for vegetable tunnels, trellis arches and small walk-in structures. For how arched designs compare with other shapes, see arch and gothic arch greenhouses.

Kit or DIY?

Some companies sell cattle panel greenhouse kits, which typically bundle brackets, ends or a base. Others sell panel-compatible hardware that you pair with panels bought locally. Panels are bulky and awkward to ship, so even with a kit, it is common to source the panels yourself.

A kit may suit you if you want a predictable parts list, brackets that fit, or a ready-made door frame.

DIY may suit you if you are comfortable with basic carpentry. A DIY build is often cheaper, because the main cost is the panels and a timber base, but you need to design the ends and door yourself. For the broader build-or-buy trade-off, see our backyard greenhouse build guide. For a cost comparison, see is it cheaper to build or buy a greenhouse.

Panel sizes and layout

Sizes vary by manufacturer and region, so check what your supplier stocks. A commonly seen panel is about 16 feet long and about 50 inches wide, made from thick wire. Panels labeled “hog” or “goat” panels often have a tighter grid and are lighter. Check the wire gauge and the grid spacing in person before buying.

Bending a long panel into an arch brings the two long edges closer together. As a very rough guide, a 16-foot panel arched between two sides produces a tunnel several feet wide and with headroom over six feet at the peak, but the exact numbers depend on how far you bend it. Mock up the arch on the ground and measure before you commit to a base size.

Materials

  • Cattle panels (one per arch section)
  • Timber for a base frame, or T-posts or rebar stakes to anchor the panels
  • Fasteners: heavy-duty fence staples, zip ties or wire to join panels
  • Greenhouse-grade polyethylene film, or polycarbonate panels
  • Lumber for end walls and a door frame
  • Wood battens or channel and wiggle wire to secure the film
  • Optional: tape to cover sharp wire ends, which can tear plastic

Step-by-step build

  1. Choose a level, sunny site and mark out the footprint. Arched tunnels often run north to south for even light, though many growers choose based on wind or space.
  2. Build the base or set the anchors. A rectangular timber base lets you screw the panels to it. Alternatively, drive T-posts or rebar along both sides and fix the panels to them.
  3. Bend and set the first panel. With a helper, lift one end into position, then slowly bend the panel toward the opposite side. Attach the lower edges securely.
  4. Add more panels. Overlap panels end to end to lengthen the tunnel, tie them together with wire or zip ties, and add a ridge brace if you want extra stiffness.
  5. Frame the ends. Build wood end walls, one with a door and, if possible, a vent above. See how to build a greenhouse door that seals well.
  6. Pad any sharp edges with tape or pipe insulation so they do not cut the cover.
  7. Cover the structure. Draw the film over the arch, keep it taut, and secure it along the base and at the ends.

Covering and ends

Greenhouse film is the usual covering and is easy to work with on an arch. Plastic film can last for several seasons but will need replacing. For a longer-lasting cover, flexible polycarbonate panels can follow the arch if the curve is gentle, but check the maker’s minimum bend radius first. Our guide on building with polycarbonate panels covers fastening and sealing.

Tips and limits

  • Anchoring matters. A tunnel can act like a sail, so anchor well. See how to anchor a greenhouse against wind.
  • Snow. Round arches shed snow fairly well, but wet snow is heavy, so brush it off.
  • Ventilation. Roll-up sides or end vents prevent heat build-up. See greenhouse vents and ventilation for more options.
  • Rust. Galvanized panels last longer outdoors, but cut or welded points may rust over time.
  • Not a heat-retaining structure. A single layer of film does not insulate much, so for winter growing consider a double layer or the ideas in do greenhouses work in winter.

If you want something smaller for a single bed, see how to build a hoop house over a raised bed.

The complete guide to diy greenhouse building

How to Build a Backyard Greenhouse
Read the guide

Keep exploring

Guides from other topics

All topics →